Can I run the ISD4000 with other sensors in seaView?

Ben Grant, Managing Director of Impact Subsea answers questions live. - Can I run the ISD4000 with other sensors in seaView?

Transcript

Another question we sometimes get asked is ‘Can I run the ISD4000 alongside other sensors?’ We provide software called seaView the latest generation is V3, seaViewV3 and within seaViewV3 you have an ISD4000 application which allows you to configure the sensor, calibrate the sensor, view all the data from the sensor and log all the data etc.

It gives you a live platform so you can either use that as your one display and configuration software or you can use it just to set the sensor up to output the correct data format, to integrate it into a third-party system.

If you’re running into seaView and you’ve got the ISD4000 app you can also run it alongside our other sensors. You can run the ISA500 altimeter, the ISM3D ahrs sensor, the ISS360 sonar, you can run them all on one screen, all of these are coming in live, all data being logged so it’s one single user interface with a lot of data being shown.

We hope that helps answer your question. If you want any more information on the ISD4000 you’ll find the latest data sheet, manuals, demonstration videos and more technical information on our ISD4000 product Page or you can drop us an email at support@impactsubsea.co.uk we’ll answer any technical questions that you have.

OUR PRODUCTS
SUBSCRIBE
► LETS CONNECT: ◄

👉 LinkedIn

👉 Twitter

👉 Facebook

👉 Instagram

Share:

Contact us

We use cookies to ensure you get the best experience while using our website.